#rsv #Name #Description
1 # number of reservoirs in the river basin
23 # subbasins number(s) of reservoir subbasin(s). The order must be similar to the order of reservoirs in reservoir.csv
San_Jacinto #Name of the reservoir
63.0 #Capac_Max #Maximum capacity of Reservoir, including dead storage [million m3]
17.8 #dead_stor #Dead storage [million m3]
0.60 #Start_Fill #Filling of Reservoir for 1st month of simulation [Start_Fill * Rsv_Cap_Act(1)], between 0.00 and 1.00
1 #Res_active #existing Reservoir? no: 0 OR yes: 1
0 #Res_activate_thresh
1884.0 #level_max #Maximum Waterlevel of HPP [mNN]
1829.85 #level_min #Minimum Waterlevel of HPP [mNN]
54.15 #level_hpp #Maximum fall heigth of HPP [m]
16.4 #cap_hpp #Capacity of HPP [m3/s]
0.90 #Efficiency of HPP (Max: 1.0= 100%; Min: 0.0= 0%) #86-90% normally
0.00001 #Rsv_loss_seepage,#in [m3/s] per [million m3 of filling volume]
0.1 #rsv_gwc                 #Fraction of seepage that becomes gwq (ground water contribution)
1.0 #rsv_evapc              #Coefficient to correct lake evaporation
0.9 #rsv_dryA_corr #Coefficient to correct Precip and Eact (eq. Epot) over bare soil
1960 #Rsv_start_year #Year for start of filling of new reservoir (Res_active= 0)
1 #Rsv_start_day #Day of year for start of filling of new reservoir (Res_active= 0
2 #Rsv_Mngmt #Kind of Reservoir Management
0.05 #Rsv_shr_withdr #share of reservoir filling available for withdrawal directly from reservoir (Max: 1.0= 100%; Min: 0.0= 0%)
10.0 #Rsv_maxdeltaQ #Maximum change of discharge between two days [m3/s]
900.0 #Qflood_max #Maximum capacity for flood discharge [m3/s]
0	#	Rsv_max_MW;	Maximum	hydropower	capacity	of	reservoir	[MW]
0	#	Rsv_min_MW;	Minimum	hydropower	to	be	generated	by	reservoir	[MW]
0	#	PlanDispatch;	0	=	Use	monthly	demand	data	and	'Share	of	reservoir	filling	available	for	withdrawal	from	reservoir;	1	=	Use	dispatch	plan	("dispatch.csv")	and	monthly	demand	data	("reservoir_monthly.csv")
0	#	Rsv_HPP_Mngmt;	Only	if	Kind	of	Reservoir	Management	eq.	2"; Read in MW to be generated
0	# Rsv_numb_group; Number of reservoirs within group; must be the same number for all reservoirs within one group
0	# Post_rsv_group; Post (position) of reservoir within group (Min eq. 1; Max. eq. "Rsv_numb_group")